Civil Engineering RCC Structures Design Online Test

The maximum area of tension reinforcement in beams shall not exceed

As per I.S. 456 – 1978, the pH value of water shall be

The minimum number of main steel bars provided in R.C.C.

Post tensioning system

An R.C.C. column is treated as long if its slenderness ratio is greater than

The width of the flange of a T-beam should be less than

Pick up the correct statement from the following:

Cantilever retaining walls can safely be used for a height not more than

If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than

The diameter of longitudinal bars of a column should never be less than

The design of a retaining wall assumes that the retained earth

The thickness of base slab of a retaining wall generally provided, is

For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is

Thickened part of a flat slab over its supporting column, is technically known as

An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at

The effective span of a simply supported slab, is

Pick up the incorrect statement from the following:

The number of treads in a flight is equal to

A foundation rests on

For initial estimate for a beam design, the width is assumed

The advantage of a concrete pile over a timber pile, is

The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon

Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by

Design of R.C.C. simply supported beams carrying U.D.L. is based on the resultant B.M. at

The transverse reinforcements provided at right angles to the main reinforcement

The amount of reinformcement for main bars in a slab, is based upon

If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is

The percentage of minimum reinforcement of the gross sectional area in slabs, is

A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is