Networking Wireless Technologies Online Test, Wireless Technologies MCQ

The IEEE 802.11a standard runs in the 5GHz RF range.

The IEEE 802.11b standard provides the lowest data rate at 1Mbps, but it also has the longest distance, which is about 350 feet.

The IEEE 802.11a standard provides a maximum data rate of up to 54Mbps, but you need to be close to the access point, somewhere around 65 to 75 feet.

The IEEE 802.11b and IEEE 802.11g standards both run in the 2.4GHz RF range.

Each AP in a mesh network runs the Adaptive Wireless Path Protocol (AWPP). This protocol allows RAPs to communicate with each other to determine the best path back to the wired network via the RAP.

The IEEE 802.11g standard provides a maximum data rate of up to 54Mbps.

The IEEE 802.11a standard provides a maximum data rate of up to 54Mbps.

The IEEE 802.11a standard provides up to 12 non-overlapping channels.

The split-MAC architecture allows the splitting of 802.11 protocol packets between the Cisco LWAPP-based AP, which handles real-time portions of the protocol, and the WLAN controller, which handles those items that are not time sensitive.

The IEEE 802.11b standard provides a maximum data rate of up to only 11Mbps, and you can be around 150 feet, maybe farther, depending on conditions.

The IEEE 802.11g standard provides a maximum data rate of up to 54Mbps, but you need to be close to the access point, somewhere around 90 to 100 feet.

The IEEE 802.11a standard’s lowest data rate is 6Mbps, but it can run from a distance of about 175 feet.

The IEEE 802.11h standard provides an addition 11 channels to the 802.11a standard’s 12 non-overlapping channel for a total of 23 non-overlapping channels.

The IEEE 802.11b standard provides a maximum data rate of up to 11Mbps.

Extended Service Set ID means that you have more than one access point and they all are set to the same SSID and all are connected together in the same VLAN or distribution system so users can roam.

The Cisco Unified Wireless Solution is a great product, but you must purchase specialized devices. Cisco managed access points and a controller are the devices you need to purchase to run the Unified Wireless Solution.

The IEEE 802.11b and IEEE 802.11g standards both run in the 2.4GHz RF range.

The IEEE 802.11g standard provides 3 non-overlapping channels.

The IEEE 802.11g standard’s lowest data rate is 6Mbps, but it can run from a distance of about 300 feet.

The IEEE 802.11b standard provides 3 non-overlapping channels.