QC Testing Online Test | QC Online Test | Online Quiz | Mock Exam

Defect Summary Graph: Defect summary graph is used to represent the summary of number of defects in project and also defines the estimate time for fixing defects.
Defect Progress Graph: Defect progress graph is used to represent the accumulation of defects in QC project.
Defect Age Graph: Defect Age graph is used to present the life status history of defects in a projects.
Defect Trend Graph: Defect Trend graph is used to represent the history of changes perform in the QC project for each time interval.
Therefore, Defect Progress Graph is the correct answer.

Requirement Progress Graph: This type of graph is used to display Specified requirement or information for a period of type. The progress graph is used in each phase of testing.
Requirement coverage Graph: This Graph is used to display the coverage of the requirement. It displays which test is linked with specified Requirement.
Requirement Trend Graph: The Requirement Trend Graph is used to display the history of changes for a specified requirement.
Therefore the suitable answer is Requirement Trend Graph.

There are 4 Different type of Graph in QC:-
1. Progress graphs
2. Summary graphs
3. Test lab has additional graphs
4. Defect Age Graph
Therefore, 4 is the correct answer.

The Cross test set is used in the Test Lab module report; it is a list that shows the test set those appear in the test set list. Three different types of options in Test set:
Cross Test Set with Tests: show lists the test sets those appear in the Test Sets list, including their test run.
Cross Test Set with Failed Test Runs: Show lists tests from the test set list, those have “Failed” test run status.
Therefore, Option B is perfect for the question.

Delete Test Run: In the quality center, we can easily delete the test run form the project but first we have to select no run for the test set and then we delete the test run from the purge run wizard.
Free Run, Delete test and free run term is not used for Delete test run in the Quality Center.
Therefore, Purge Run is the correct answer.

In QC there is 2 Option for running test: Through Sprinter and Manual
Sprinter: It is an advance functionality that is used for executing manual test execution with advance option and setting. But if this is not available then we use Manual Runner
Manual Runner: In Manual Runner, the tester follows the test steps and performs operations on the application under test. After running the steps tester decide test passed on failed based on the basis of actual result and expected result.
Therefore, according to the option manual Runner is correct option.

The root folder is used to define test set list. But we cannot add a TestSets directly in root folder, firstly we have to add a sub folder or an unattached folder and then we use Testset factory for defining Testset list.
Therefore, option C is the correct answer.

Sanity Test cases: Sanity test cases include the fundamental test that is used to validate the application by using the positive or valid input values.
Functional test cases: Function test cases are used to verify the functionality and business goal of the product and client.
Regression Test cases: Regression test cases are used to verify or analyze the system for finding defect due to change in other part of the system.
Advanced test cases: Advanced test cases are not used to validate application.
Therefore, Sanity test case is the correct answer.

Purge Run: Purge run wizard is use to delete old test run form the project.
VAPI XP: VAPI XP is a testing tool that is used to create new testing script for the project with the help of java script, VB script etc.
LR Scenario: LR scenario is a testing tool that is used to create and execute the scenario by Load runner.
WR automated: WR automated is use in win runner tool to create winrunner test and execute.
Therefore, Purge Run is the correct answer.

In QC there is only 2 flags used for the indication:
Red Flag: It is used to indicate the new requirement.
Grey Flag: Grey Flag is used to indicate the alert message that has already been read.
Green and black Flag are not used in QC.
Therefore, Grey Flag Option is the correct answer.

In Quality Center, we are able to create our own alert to remind for any outstanding issue. It is known as follow up alert that is used to remind for issue that we want to check after one week. It is represented by the grey flag and when remind date arrive, QC send an email to the user and change the color of flag icon to red.
Therefore, Follow up is the correct answer.

F1 shortcut key is used for Displays help for the selected dialog box..
F9 shortcut key is used for access Requirement menu bar from the Requirements module.
Ctrl + R shortcut key is used for Creating a new release.
Alt + Shift + R shortcut key is used for preview option.
Therefore, F9 is the correct answer.

In QC, user can easily find and replace the specific value in a tree and Grid. Users can replace field value for a specific selected record or for all records in the tree or grid
Replace All: Replace all are used to replace all same value or text of the value in the grid.
Replace: replace is used to replace the item and again find the next occurrence of the value.
Find and Replace: Is a popup that is used in replace and replace all option for finding specific value in the tree or grid
Therefore, the correct answer is “All of these”

Manual Runner: Manual Runner is the process when the tester runs the test scripts manually and compare the actual result with expected and record the result.
Automation Runner: Automation runner process is the process when test script automatically runs from the Quality center. We select the all test run script or specific test run script that we want to run in the execution flow tab or execution grid tab
Therefore, Automation Runner is the correct answer.

Coverage Analysis: In the requirement module, we use Coverage Analysis to examine the status of requirement in the Quality center.
Coverage Breakdown: Coverage Breakdown is used to represent the percentage of the failure occurred in the system.
Requirement Status: Requirement status is a term that is used to display the value in the requirement module’s field Direct cover status.
Coverage Status: Coverage Status is used to represent the percentage of the testing covered in given time.
Therefore, Coverage Analysis is the correct answer.

Requirement Module: In the requirement module, there is a field that is Requirement type. This field is used to represent the type of requirement. There are multiple types of requirement: Business, undefined, Group, Folder, Functional and Testing. By default we cannot add coverage to business, folder and group requirement.
Therefore, all of these are the correct option.

Version Control: Version control is used to maintain track of changes that are made in the project entities. Entities are Requirement, tests, test resources, and business components. There are some fields those are not saved in the version control. In requirement module, Reviewed field, Direct Cover Status, Target Release, Target Cycle and RBQM fields are not stored in the version control.
Therefore, all of the above is the correct answer.

QuickTest_Test: QuickTest_Test is a test type list is available when we install addins from HP quality center. It is used to execute the test by QuickTest Professional and it is also used for open and display error report in Quick test professional.
Therefore, Test type list is the correct answer.

Alt+Left shortcut key is use for Displays the previous entity
Alt+Right shortcut key is use for Display the next entity.
Alt+Home shortcut key is use to access first step in Design step editor.
Alt+Up shortcut key is use for increase zoom level in graph and display next page in report.
Therefore, Alt+Home is the correct answer.

F7: F7 shortcut key is used for Spell checks the selected word or text box.
F9: F9 shortcut key is used for access the Test Lab menu bar from the Test Lab module
F6 and F8 shortcut key is not used in Quality center.
Therefore, F9 is the correct answer.

In the QC, there are 2 types of lines that are used for indication: Solid and Dash. Solid line is used to indicate the test to be executed only if the previous test result has ‘Finished’ and Dashed line is used to indicate which test is to be executed after the previous test without any condition.
Therefore, option A is the correct answer.

In the QC, there are 2 different blue lines that are used for indication, one is dashed blue and other one is solid blue. Solid Blue line indicates the test to be executed only if the previous test result has ‘Finished’ and Dashed Blue line indicates which test is to be executing after the previous test.
Therefore, option B is the correct answer.

We can link the defect with many entities: Requirement, test, test set, run or many more. The linking defect is useful when we create new test for any specific defect. We can link defect directly or indirectly to the test. Sequence for link defect to test: Run step>> Run>> Test instance>> test>> Requirement.
Therefore, Option A is the correct answer.

Filter functionality in used to display a specific data based on certain criteria. Filters are used for all modules – Requirements, Test Plan, Test Lab and Defects.
Define new filter: In the QC we can define or create new filter criteria by manually and easily saving the filter.
Use Current Filter: Its means select last filter criteria are used for the other result.
Do not use filter: If we select do not use filter then data should be displayed in by default order.
But, Update filter is not used in the QC.
Therefore Update filter is a best option for the answer.

Script Editor: Script Editor is use to restrict and dynamically change the fields and values in the Releases module, defect Grid, Requirement module, Test grid, test resources module and Execution grid.
QC Editor: QC editor is not use in the Quality center.
VB Editor: Visual Basic Editor is the tool that is use to create, modify and maintain Visual Basic for Applications.
Therefore, Script Editor is the correct answer.

release represents a group of change in one or more applications. Each release contain cycles. A cycle is a development and QA function that is performed on the project. For creating Release and cycle, we use release tress by adding folder under the release root folder that is used to define release and cycle to them. Each release and cycle has a unique id and is not editable and also has start and end date.
Therefore, Option C is the correct answer.

Coverage Analysis: Coverage Analysis is used to display or analyze the requirement in the requirement module.
It is helpful to analyze the breakdown of child requirements according to test coverage status.
Requirement view: Requirement view is available in the view menu to set the display of the requirement tree or grid.
Requirement grid: Requirement grid is enabling you to display requirement in Flat non-hierarchical view.
Requirement Tree: Requirement tree is enabling you to display the requirement in a tree form.
Therefore, Coverage analysis is the correct answer.

Filter: Filter is used to refine the requirement, result or data on the basis of some conditions. There are multiple logical operators that are used in the filter of quality center. Operators are OR, AND, (), NOT, >, =, = Therefore, { } operator is the correct answer.

Traceability Matrix: Traceability matrix is used to determine the extent of relationships between requirements and other requirements. It is also used to determine the extent of relationships between requirements and tests cases and it also helps to determine whether any requirement is affected by any selected requirement or not.
Therefore, option B is the correct answer.